What’s in Your Shed? visits a Cheshire mixed farm

Our latest What’s in your Shed? heads to Cheshire to visit mixed farmer Graham Lowe.

The families’ workload load includes a herd of beef cattle along with arable cropping and baling, as well as a farm shop and equine business.

We find out why he is so loyal to the New Holland brand and still runs a brace of older TM models on the frontline

How did you get started?

My dad moved here in 1958 when the farm was just 12ha.

He opened a simple farm shop a couple of years later and we have gradually built up the business from there.

Now we are farming a total of about 200ha, roughly half of which is rented, and we grow 40 types of vegetable to sell through the shop.

The shop itself was rebuilt and extended in 2015 and we are planning to add a café next.

See also: What’s in Your Shed? visits an Irish grassland contractor

How brand loyal are you?

We have been very brand loyal over the years, as we have two superb local dealers that we like to work with. One is Malpas Tractors, which is why we have a fleet of New Hollands, and the other is John Bownes.

Most of my other machinery comes from him and I also have quite a few classics that he sourced for me.

New Holland TMs

New Holland TMs

Business facts: DJ Lowe and Partners, Shanty Farm, Byley, Cheshire

  • Farming: 200ha mixed farm
  • 250 head of beef cattle
  • 65ha of cereals including wheat, barley and oats
  • 10ha potatoes
  • 40 different types of vegetable sold through the farm shop
  • Contracting: Baling, wrapping, silage
  • Other: Farm shop and equine feed business
  • Staff: Graham, Tracy, Tom and Sam Lowe, plus two full-time in shop and six to 10 part-time staff

I have also had some classic Fords from John Tomkinson at Market Drayton, and Ellis Machinery at Gaydon, Warwickshire, is good to deal with – its machinery is always immaculate and the service is excellent.

Favourite piece of kit?

Our Kuhn Primor straw chopper. When we got it 11 years ago it massively reduced our straw use. We’ve only had to replace one set of blades in that time and it still looks as good as new.

Kuhn Primor straw chopper

Kuhn Primor straw chopper

Least favourite?

We had a Bomford Falcon Evo hedgecutter that we just couldn’t get on with. It was a high-spec machine with variable forward reach, but we found it very hard to control and almost impossible to keep the top of the hedge flat. We replaced it with a simpler Kuhn Pro-longer that we’ve been really happy with.

In the shed

  • Tractors: New Holland T7.235, T7.200, T6.180x 2, TM155, TM140 and 8260, Ford 3910, 4610 and 3600, Valtra A73
  • Balers: New Holland Combi 125 round baler/wrapper, BB950 big square baler and BC5070 conventional baler, Kuhn Intelliwrap bale wrapper, McHale mini bale wrapper
  • Grass kit: Kuhn front and rear mower, Krone six-rotor tedder, Kuhn twin-rotor rake
  • Cultivation kit: Kverneland EG85 five-furrow vari-width plough, Heva 3m Combilift, Amazone 3m power harrow, Standen 3m rotavator, Dalbo 6.3m Cambridge rolls
  • Drill: Kuhn Integra 3m combi drill
  • Trailers: Richard Western SF11 and  SF12 silage trailers, Weeks 8t and 10t grain trailers, West 8t and 10t grain trailers, AW cattle trailer, 21ft Marshall bale trailer x 2, 25ft Predator bale trailer
  • Telehandler: JCB 526S
  • Veg kit: Grimme DL15 and row over potato harvesters, Standen bedformer and destoner, Reekie potato planter, assorted small-scale veg equipment
  • Other: Kuhn Primor straw chopper, Bunning Lowlander 90 muck spreader, JCB 3CX excavator

What’s your latest purchase?

We have just taken delivery of an ex-demonstrator New Holland T6.180 that’s on about 200 hours.

It’s the newer shape machine and is so much more comfortable than the T6.175 we had before. We have only done a few hours in it, but so far it looks like a good purchase.

Best tractor you’ve had?

We used to have a K-reg Ford 7840 with retrofit turbo that was fantastic. We had it for 10 years and it easily coped with our Reco Mengele SH40 forager, which was fairly power hungry.

The tractor was supposedly running at 125hp, but we think it was putting out a fair bit more than that.

The only spare part it had other than oil and filters was the fan belt. It got traded in for a TM135 when it was on 7,840 hours, but I wish we had kept it, really.

Our current T7.235 Power Command comes a close second. It has more than enough power for what we need and it’s very smooth.

Worst tractor you’ve had?

The worst was a New Holland T5 with a loader. The tractor itself wasn’t too bad, but the mounting brackets for the loader were too far forward, meaning it was incredibly front heavy.

After 12 months we got fed up with how light it was at the rear end and moved it on. Shortly after that I think New Holland changed the brackets on them, so later or modified models might have been fine.

How long do you keep your machines?

We tend to keep our frontline tractors for three years and, because we only do about 500 hours a year, they’re still under warranty when we come to sell them.

To make sure we get the best trade-in prices, we look after them as best we can and they get treated to a full valet every season. It only costs £35 a tractor and it gets them looking like new.

Our older New Holland tractors get the same treatment, but we have no plans to change these.

The rest of our kit is changed when it’s worn out or we fancy a change. We are fastidious about looking after it all and everything gets stored under cover.

Biggest machinery bargain?

Our best buy has to be our New Holland 125 Combi baler. It was a demonstrator model that had done 700 bales and we were offered it for £20,000 less than the new price.

It’s very easy to use and so much quicker than running a separate baler and wrapper. We also like the fact that it drops the wrapped bale on to a mat, reducing the chance of wrap getting punctured.

A lot of our haylage is sold to horse owners, so it’s important we keep the quality high. For that reason we also put eight layers of wrap on each bale. Speed is pretty decent too, with it comfortably popping out 40 bales an hour.

New Holland Combi Baler

New Holland Combi Baler

Oldest machine still at work?

We are still using an old 1950s Robot potato planter that my dad bought. It’s very simple with a land wheel and chain to turn the planting cups, but it does everything we need.

What’s next on your wish list?

We’re looking to get an 80×70 square baler. At the moment we’re doing round, conventional square and 120x70s, but we think there is good demand for that interim size.

They are also good for the equine market as they’re just about small enough to handle manually. All our current balers are New Hollands, and this one probably will be too.

Biggest machinery mistake?

I was cutting a neighbour’s hedges, which I’d done for years, when I ran over the valve on a new underground gas tank they’d had installed.

It caused the tank to leak and the emergency services shut the road for 24 hours while it was sorted. My insurance company also had to provide a new tank.

Biggest repair bill?

We were landed with a £6,000 bill on our New Holland BB950 baler when one of the needles pushed something tough (we’re not sure what) into the knotter and smashed it. Malpas Tractors did the repairs for us and thankfully our insurance covered the fee.

Best invention?

It’s very simple, but we made an inter-row side-hoe weeder out of an old ridger. It works well, cost us nothing and was quick to put together.

What’s your everyday transport?

I have one of the last twin-cab Land Rover Defender pickups. I used to buy them with discount vouchers from the NFU and change them every three years, but obviously that has had to stop now.

I sold the last one to the tuning house Kahn Design, which was planning to bling it up, and it only cost me £3,000 to change. This latest model is on 16,000 miles so far and I’ll be hanging on to it.

Do you have any classics?

I have quite a few that I’ve picked up over the years, most of which are Fords and David Browns. A few of them still get used on our vegetable ground, but most are stored. They are all run up at least once a year though.

Want to show us yours?

If you’d like us to feature your kit in our What’s in Your Shed? series, then drop us a line at oliver.mark@markallengroup.com

Need a contractor?

Find one now